is 9103 concrete admixtures standards

IS 9103 concrete admixtures standards

This Indian Standard ( First Revision ) was adopted by the Bureau of Indian Standards, after the draft finalized by the Cement and Concrete Sectional Committee had been approved by the Civil Engineering Division Council.

Admixtures are materials added to the concrete before or during its mixing, with a view to modifjring one or more of the properties of concrete in the plastic or hardened state. An important feature of the majority of admixtures for concrete is that it is difficult to quantitatively evaluate the behaviour of the concrete under various possible circumstances. Therefore, performance of an admixture is evaluated by comparing the properties of concrete with the admixture under test with those of concrete without any admixture or with a reference admixture. This standard lays down the procedure for such a relative evaluation of admixtures for concrete.

In recent time there has been a lot of development in the field of admixtures. Superplasticizers, both normal and retarding type, constitute a major group of admixtures used by site engineers now. Superplasticizers help in lowering the water/cement ratio so as to contribute to the enhancement of durability. In this first revision of the standard, first published in 1979, requirements of superplasticizers in detail and methods of determination of flow of concrete of high workability have been added.

This standard also gives uniformity tests which demonstrate that a particular consignment is similar to material that has previously been submitted to the acceptance test. The admixtures covered in this standard are intended mainly for modifying a single property in concrete, but some of the admixtures available in the market are often capable of modifying more than one property of-the concrete. In addition, an admixture may be used to improve the desirable properties of concrete in more than
one way. For example, water reducing admixtures ( see 3.4 ) may be used to improve the workability of concrete with the same water and cement contents, to increase the compressive strength without changing the workability by reduction of the water content in the concrete mix or to effect saving in cement content by reduction in both the cement and water contents in the mix while maintaining the same workability and compressive strength as in~the reference concrete. In such cases, the procedure of evaluation of the admixture may have to be appropriately chosen. This standard also provided for evaluation of admixtures for specific use with the materials and mix proportions to be used on the work.

The performance of concrete admixtures including superplasticizers depend upon both the admixtures and the cement and their compatibility, in addition to the~concrete mix proportions and the environmental conditions in the field. Among the characteristics of the cement, which affect the performance of concrete admixtures including superplasticizers are the &A, SO, and alkali contents, nature of sulphates, and the fineness. The ambient temperature and humidity conditions influence the performance of set-controlling admixtures and affect the retention of enhanced workability ( slump loss ) when water-reducing admixtues and superplasticizers are used. While no generalisation of these effects is possible, it is nevertheless necessary to evaluate concrete admixtures for specific use with the concrete-making materials and mix proportions to be used on the work, under lield conditions. This standard also provides for such specific evaluation of an admixture, in addition to
the general evaluation for confomity to the requirements of this standard. The requirements of integral waterproofing admixtures are covered in IS 2645 : 1975 ‘Specification for integral cement waterproofing compounds (first revision )‘.

For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test or analysis, shall be rounded off in accordance with IS 2 : 1960 ‘Rules for rounding off numerical values ( revised)‘. The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.

click here to download

labels: is 9103 pdf, is 9103, IS 3370 PART 1 2 3 4,IS 456,SP 16,IRC 37 2001,IRC 37 2012,IS 1343,CE  2038,CE 2255,design of pavement,CE 2038 PDF,IS 383,IRC 65.CIVIL IS CODES.is 456 2000 pdf,is 800 2007,irc 65,irc66,irc72,irc73,is 875